Author: admin8010

Technical drawing – how to read it

When working in engineering and technical industries, the ability to read technical drawings is essential. When choosing education in fields such as machine operators, welders, mechanics, mechatronics or robotics, part of the school classes will be devoted to these topics. Using the compendium of knowledge developed below, you can now learn the specifics of technical drawings and test your skills in this field. When you start your adventure with technical professions, your knowledge of markings, tolerances and descriptions will be verified at every step. The decisions you make will be based on what you can read from the technical drawing. Technical drawing as a form of communication Drawing is the basic production documentation in almost every industry, from mass production of toys to the production of airplanes and space shuttles. Establishing universal principles of creation and describing the drawing allows you to clearly convey exact requirements and data regarding the product. Few people realize it, but technical drawings are an excellent communication tool between engineers, designers and the industry. Drawing enables understandable communication even between people who do not speak the same language. On the other hand, it requires learning the principles of reading and understanding technical drawings. In order […]

Read More

Technical drawing – geometric tolerance symbols

Do you know what geometric tolerance symbols are? When it comes to ensuring product quality, these are the most important elements of a technical drawing. Any dimension outside the tolerance indicates a nonconformity. You must be able to interpret measurement results based on the tolerances of the technical drawing. What are geometric tolerance symbols? When designing parts, the engineer creates a technical drawing and includes key dimensions onto it. These are called nominal dimensions. It is impossible to produce a series of products according to nominal dimensions only. Therefore, deviations from the dimension are used, which are referred to as dimensional tolerances. These may apply to various elements and areas of the product. Therefore, geometric tolerance symbols are defined. What are they? These are all “figures” that appear next to a numerical value and refer to a specific product characteristic. In practice, there are several symbols used that mean the same thing all over the world. Regardless of whether the drawing was designed in Japan or in the USA. Understanding and remembering what each symbol means will help you to interpret measurement results. Geometric tolerance symbols are divided into four categories: Geometric tolerance symbols – definitions and examples Knowing these […]

Read More

Welding seams on a technical drawing

One of the main methods of joining metal elements is the welding process. Welding is a special process and requires precise determination of process parameters. One important aspect is determining the requirements for the weld. The marking of the weld in the drawing and its names are strictly defined. It is accepted in the industry that welds are divided into three categories: butt welds, fillet welds and others. There are also a number of subcategories of welds. Types and symbols of weld marking in the drawing Method of marking the weld in the drawing Welds are marked in a specific way in the drawing, their characteristics are defined by 8 points. It is common to see less information in a drawing (4-5 points) because it is sufficient for description. A detailed description of the points with an illustration below Method of marking weld quality control methods in the drawing When special non-destructive inspection of a weld is required, it is necessary to include this information in the weld description on the drawing. The test method is then specified in point 8 by a two-letter description. Below is a “decipher” of possible descriptions: • VT – visual examination of the weld […]

Read More

Selection of measuring instruments for a given drawing dimension

Do you know which tool to choose for a given dimension? Or do you measure with what is at hand? Maybe you always choose a digital caliper because it’s easiest? A well-selected measuring tool for a given specification will avoid potential quality complaints about the product. If you don’t know what criteria to follow, you’re probably doing it wrong. Selection of measuring instruments – key rules First, a few crucial general rules with a simple, but very interesting, example to folow. This will Pinpoint of how a poorly selected tool introduces a huge risk of making a wrong decision regarding compliance with the specification. What to do when we receive an element to be measured along with a technical drawing? What should you consider when selecting a measuring tool? That doesn’t mean you measured wrong…I assume you did everything correctly. The measurement result is so-called observed, it is subject to measurement uncertainty. Uncertainty of measurement Measurement uncertainty is a symmetrical interval around the measurement result, which contains the actual value with a certain probability. The sources of uncertainty are different and depend on a given measurement procedure, they may result from: the tool, the measured object, environmental conditions, the person […]

Read More

Micrometer – how to measure?

A micrometer is one of the most popular measuring tools. The micrometer was invented in 1844. The micrometer has been used for measurements for a long time. Now it is one of the most accurate measuring instruments. What elements is a micrometer made of? What steps should be taken before easurement? And most importantly, how to measure with a micrometer. Micrometer – what is it? A micrometer is a measuring tool used to make accurate measurements of components. When taking measurements with a micrometer, you measure with a very high accuracy of 0.01 – 0.001 mm. Thanks to the micrometer, which is characterized by easy construction and simple operation, you can perform precise measurements with very high accuracy. Sometimes a caliper may prove to be an insufficient measuring device. Then a micrometer will be a sufficient solution. Depending on the structure, micrometers allow us to measure: Micrometers can also be divided into digital micrometers and analog micrometers. Micrometers are available with different measurement ranges: 0÷25 mm, 25÷50 mm, 50÷75 mm and so on, every 25 mm. Micrometer – how it is constructed What elements is a micrometer made of? The micrometer consists of the following elements: The sleeve is used […]

Read More

CNC Operator

Turner and milling machine in a modern version – using computer geometry control in an efficient, safe and clean way, complex contouring processes can be performed, creating details of various forms.

Read More

Welder

A profession that connects! Small and large structural elements, pipelines and large-size silos, shipbuilding structures, sealing and anti-corrosion coatings – none of this will be created without a variety of welding techniques.

Read More

Mechatronics

The name itself suggests a super-mix! Engineering interdisciplinarity, adaptation and the ability to systemically combine the issues of mechanics, electronics, robotics, automation managed by IT – this is the field of action for mechatronics, i.e. an exciting profession of the future.

Read More
Skip to content